| Code | Description | Weight | exVAT | incVAT |
|---|---|---|---|---|
| HVR.100 | Running section (610mm long) comprising 1 x plinth (HVR.101), 2x balusters (HVR.102), 1 x coping (HVR.103) | 59Kg | £101.67 | £122 |
| HVR.101 | Running plinth section 610mm long | 23Kg | £25.83 | £31 |
| HVR.102 | Hever Baluster | 10Kg | £25.83 | £31 |
| HVR.103 | Running coping section 610mm long | 16Kg | £24.17 | £29 |
| HVR.200 | End section (610mm long) comprising 1x end plinth (HVR.201), 1x baluster (HVR.102), 1x die (HVR.202), 1x end coping (HVR.203) | 84Kg | £128.33 | £154 |
| HVR.201 | End plinth section 610mm long | 23Kg | £27.5 | £33 |
| HVR.202 | Die block (to add strength at end sections and placed at 3 to 5 metre intervals on long runs) | 35Kg | £49.17 | £59 |
| HVR.203 | End coping section 610mm long | 16Kg | £25.83 | £31 |
| HVR.300 | 90Ëš corner set comprising 1x 90Ëš plinth (HVR.301), 1x 90Ëš die block (HVR.302), 1x 90Ëš coping (HVR.303) | 75Kg | £118.33 | £142 |
| HVR.301 | 90Ëš plinth (each leg 305mm long) | 13Kg | £28.33 | £34 |
| HVR.302 | 90Ëš die block | 51Kg | £65 | £78 |
| HVR.303 | 90Ëš coping (each leg 305mm long) | 11Kg | £25 | £30 |
| HVR.400 | 135Ëš corner set comprising 1x 135Ëš plinth (HVR.401), 1x 135Ëš die block (HVR.402), 1x 135Ëš coping (HVR.403) | 87Kg | £125 | £150 |
| HVR.401 | 135Ëš plinth section (each leg 280mm long) | 15Kg | £29.17 | £35 |
| HVR.402 | 135Ëš die block | 60Kg | £70 | £84 |
| HVR.403 | 135Ëš coping section (each leg 280mm long) | 12Kg | £25.83 | £31 |
| HVR.500 | Running radius section (radius = 7200mm comprising 1x radius plinth (HVR.501), 2x baluster (HVR.102), 1x radius coping (HVR.502) | £111.67 | £134 | |
| HVR.501 | Radius plinth (radius = 7200mm measured at centreline, approx 610mm long at centreline) | £30.83 | £37 | |
| HVR.502 | Radius coping (radius = 7200mm measured at centreline, approx 610mm long at centreline) | £29.17 | £35 | |
| HVR.510 | Running radius section (radius = 3960mm comprising 1x radius plinth (HVR.511), 2x baluster (HVR.102), 1x radius coping (HVR.512) | £111.67 | £134 | |
| HVR.511 | Radius plinth (radius 3960mm measured at centreline, approx 610mm long at centreline | £30.83 | £37 | |
| HVR.512 | Radius coping (radius = 3960mm measured at centreline, approx 610mm long at centreline) | £29.17 | £35 | |
| HVR.520 | Running radius section (radius = 1660mm comprising 1 x radius plinth (HVR.521), 2x baluster (HVR.102), 1x radius coping (HVR.522) | £111.67 | £134 | |
| HVR.521 | Radius plinth (radius = 1660mm measured at centreline, approx 610mm long at centreline) | £30.83 | £37 | |
| HVR.522 | Radius coping (radius = 1660mm measured at centreline, approx 610mm long at centreline) | £29.17 | £35 | |
| HVR.601 | Standard raking die block (angle = 20 degrees raking from horizontal) | £58.33 | £70 | |
| HVR.602 | Raking balusters available up to 38 degrees raking from horizontal | 10Kg | £36.67 | £44 |